The hardest part of insulating your truck bed camper is finding a good balance between high R-value and small thickness. Most RV and trailer building “salesmen” generally use a very similar technique to keep heat in. While that’s usually the best option for most RV’s, it also means putting in a framing piece inside your camper.
It can be a little difficult to make sure that you’re not over-insulating your RV. In fact, if you’re planning on using a metal roof (as opposed to a wooden roof), you may want to consider doing some more testing to ensure that you have adequate R-value. This doesn’t mean that you should use thick foam insulation. Quite often, people will just go with the cheap stuff because they don’t know what else is available to them. You’ll need to do some comparison shopping before you commit to something, so you know exactly how much you’re spending and where to buy it.
For a decent R-value to keep the temperature in your RV comfortable, the recommended range is somewhere between one and two inches. If you find that you aren’t comfortable with your R-value, then go with another option until you find what you like. You want to make sure that you’re comfortable when you’re out in the without having to spend hours inside or outside to stay warm. Even if you plan on sleeping outdoors more often, it doesn’t hurt to take this into consideration, especially if you spend a lot of time on your vehicle.
There are many different companies and brands of truck camper insulators out there, but there are only a few that really stand out from the crowd. My favorite is a product called Eureka! This is actually the preferred choice for a lot of RV builders and owners. Because it uses the technology used by industrial buildings, this product is designed to insulate almost anything you can think of. from your truck to the ceiling. If you like to travel often, this may be what you’re looking for.
Another option is called ‘Reverse Thermal Foam’. This is basically a large plastic cover that is installed over the entire bed of your RV to provide both insulating and thermal properties. Since the interior part is so tightly sealed, it will prevent heat from escaping while keeping your RV cooler during the summer months and warmer in the winter months. These products typically require a sealant to seal around the perimeter and the door and windows. They are extremely economical as well, but they are more prone to leaks than traditional insulators.
When you are looking for a Truck van camper conversions camper to put in your home or travel trailer, you’re bound to find one that you like. Just be sure that you get a product that fits your budget and your needs